Air Compressor Bracket – Mitsubishi Triton MV / Nissan Navara D27 Series – Rear Quarter Panel

Part Number: TLR684601

This TLR Products Air Compressor Bracket is designed to suit the Mitsubishi Triton MV Series and Nissan Navara D27 Series and accommodates fitment of both the ARB Single and Twin Air Compressor Models, Electrical Switch and Air Coupling.

The bracket has been developed using the latest 3D modelling software and locates in the rear quarter panel and makes use of pre-existing holes and mounting locations. The bracket set includes an Air Intake Filter Relocation Bracket which raise the air intakes to a higher location in the inner guard to ensure the filters are above the wading depth of the vehicle and also cleaner air away from dust. 

There are various ARB components included in this fitting kit, although below are the additional components required for a complete operational compressor installation.

• 1 x ARB Twin Compressor (CKMTA12) OR 1 x ARB Single Compressor (CKMA12)
• 1 x ARB Pump Up Kit (171302V2)
• 1 x ARB 90-degree Elbow (0740104)
• 1 x ARB Air Hose 1.00m (0740203)
• 1 x ARB Air Coupling JIC4 (0740111)

All Components above sold separately or included in the Complete Kit TLR684604.

As an alternate Air Coupling Mounting location, the TLR Products ARB Air Coupling Mount (TLR710001) can be mounting to the Trailer Plug Bracket (TLR714601) and the electrical switch mounted inside the vehicle. 

If this option is the preferred choice, this will require to swap the 1.00 m ARB Air hose for the 1.50m ARB Air Hose (0740204).

Features: 

• Suits ARB Single and Twin Air Compressor models (Mounting holes included for both TJM Single and Twin Compressors).
• Mounting location for both Air Coupling and Electrical Switch included 
• Space saving design fits in the open space in the rear quarter panel.
• Laser cut from zinc coated 2 mm steel.  
• Powder coated in a black textured finish for added corrosion resistance and aesthetics.
• Makes use of pre-existing mounting holes. 

Includes: 

• TLR Products Air Compressor Bracket.
• Fitting kit including all hardware and fasteners required for fitment.

Note: 

• Weight: 2.5 kg
• Dimensions: 300 x 250 x 90 mm
• Warranty: 3 years
• Fitting time: 30 mins
• Bracket set only. Compressor and accessories sold separately. 

DOWNLOAD FITTING INSTRUCTIONS HERE.

TLR Products is Australian owned, with all manufactured products designed and made in Newcastle, NSW.