AWNING MOUNTING BRACKET MID S/STEEL
There is not much thought gone into most awning brackets on the market, just a simple bracket to get the awning on the side of your car, but they often end up a lot higher than need be which means you have trouble in car parks and your garage and many brackets allow excess vibration on the awning which result in rivets and bolts constantly coming loose causing failure of the awning itself. We have come up with a neat fabricated solution with folded side to reduce flex and have three options to get the awning at the right height to allow it to be mounted as low as possible yet still allow your doors to be opened and not foul on the awning. We recommend you measure up the mounting holes on your awning and use the diagram in the gallery to select one of the 3 options that best suits your situation. You need at least two of these brackets, if you have a heavy awning or lightweight roof-racks then three can be a good idea to spread the load
- .375 kg
- 210 × 95 × 95 mm
WATER PUMP 65PSI 6L/M
WATER PUMP 65PSI 6L/M$74.80 Inc GST Great little water pump for camping, enough pressure and flow to run a small shower. This is one of the... read more
BCDC MOUNTING BRACKET TO SUIT TOYOTA 70 SERIES
BCDC MOUNTING BRACKET TO SUIT TOYOTA 70 SERIES$77.61 Inc GST The REDARC BCDCMB-002 Mounting Bracket is suitable for Toyota LandCruiser 70 series, assisting with installation of our BCDC range into a vehicle engine bay. read more
AWNING MOUNTING BRACKET HIGH S/STEEL
AWNING MOUNTING BRACKET HIGH S/STEEL$110.00 Inc GST TLR mounting brackets to fit all popular 2m-2.5m Awnings to rhino vortex / HD crossbars.
- will not fit rhino bat wing or similar awning.
- Manufactured from 3mm stainless steel.